At Sunniside, Steve & Ian start to remove fishplates |
Dave uses manual methods ..... |
..... as does Lapis |
Disconnecting from the buffer stop |
Steve finishing off this joint |
Stripping bullhead from the timberwork |
There are a few more difficult screws |
Lapis at work |
Ian clearing a storage area at East Tanfield (photo courtesy of Geoff Lowe) |
Geoff painting the site gates (photo courtesy of Geoff Lowe) |
Unfastening more bullhead rail from Sunniside loop headshunt |
The point itself is flat bottom rail |
Some of the nuts are very tight (photo courtesy of Dave Dixon) |
Freeing nuts by using a cold set - when Ian nods his head, I hit it (photo courtesy of David Dixon) |
Much of the loop headshunt is now ready for removal |
No comments:
Post a Comment