Wednesday, 18 July 2018

More ETCS

George removing a protrusion from the entrance doorway cill

Tuesday, 17 July 2018

Saturday, 14 July 2018

Today's Train Crew

The photos below are courtesy of Angela Pickering: 

Ben & Logan cleaning No.2

Tomorrow's Trains

Tomorrow, Sunday, HL No.2 will haul passenger trains from Andrews House at 10.30 am, & thereafter from East Tanfield at 11.25 am, 12.45 pm, 2.15 pm & 3.35 pm for Sunniside & return.   The last passenger train leaves East Tanfield at 4.55 pm for Andrews House only.

The timetable may be changed due to temporary speed restrictions to reduce lineside fire risk.   At East Tanfield, the main platform & loop are back in operation.

Full timetable available via Plan a Visit / Calendar on www.tanfield-railway.co.uk

Chris & David on No.2 descending Causey East Incline in July 2016

Friday, 13 July 2018

Thursday, 12 July 2018

Wednesday, 11 July 2018

Monday, 9 July 2018

General Jobs

A Towne engineer inspecting chains this morning
(photo courtesy of Ian Cowan)

Sunday, 8 July 2018

Saturday, 7 July 2018

Murder Mystery Evening

No.2's crew for the event - fireman Antony & driver David
(photo courtesy of Angela Pickering)

Three Weeks Ago

The photos below were taken on Gala Saturday 16/06/2018, & are courtesy of Ken Snowdon:

Tomorrow's Trains

Tomorrow, Sunday, Twizell will haul passenger trains from Andrews House at 10.30 am, & thereafter from East Tanfield at 11.25 am, 12.45 pm, 2.15 pm & 3.35 pm for Sunniside & return.   The last passenger train leaves East Tanfield at 4.55 pm for Andrews House only.

The timetable is subject to change due to temporary speed restrictions to reduce lineside fire risk.   At East Tanfield, the main platform & loop are back in operation.

Full timetable available via Plan a Visit / Calendar on www.tanfield-railway.co.uk

Twizell passing Marley Hill signalbox on a sunny & green day in July 2015
(photo courtesy of Dave Hewitt)

Friday, 6 July 2018

Thursday, 5 July 2018

Wednesday, 4 July 2018

Monday, 2 July 2018

Workshop etc

Jim using a dial gauge to check the run out before machining Horden's smokebox door rim