Search this blog

Wednesday, 24 August 2022

Wednesday

Ian demolishing the forge chimney, which has become unstable
The side wall and front lintel have shifted outwards, removing support for the corbelled chimney, which was breaking up in several places.   Having ruled out temporary packing & tie rods because of the dangers during their installation, we thought the safest option would be to knock down, secure the supports & rebuild.
The bulge in the supporting forge side wall
will be taken down, then the structure rebuilt
Barry sawing louvre brackets & filing off sharp edges
Ian drilling the brackets
Geoff feeling blue
(photo courtesy of Geoff Lowe)
Dave further raising the shed furnace chimney .....
..... with Martin mixing
Richard sawing louvres
Ian is in the scissor lift in the lantern, fitting bars & glazing
This evening's external view showing progress on the lantern

2 comments:

Richard Hannay said...

I assume, as custodians of such a historic building, the forge chimney was carefully documented before it was taken down, so the rebuild will be accurate?

TRBlogMaster said...

Yes, we have dimensions, photographs and the bricks. The forge itself has not been demolished, although a bulging wall will need to be re-erected. We had little time to act since noticing movement in the structure, to the point where I witnessed mortar tumbling down the outside of the chimney on Tuesday, even though nothing was happening thereabouts.