Thursday

Colin preparing to cut a slot in a piece of oak for the chaldron waggon .....
(photo courtesy og Geoff Lowe)

..... & cutting a mortice in another oak member for the chaldron
(photo courtesy og Geoff Lowe)

Geoff testing Colin's mortice & tenon work
(photo courtesy og Geoff Lowe)

Jim setting up to produce a missing part for a track tool .....

..... & milling a slide bar from Stanley

Ian moving a waggon that's about a foot off the way at the rarely-used end of a siding

Rerailing the other end

It's only about 6 inches to the side, but more than that down in wet slime.
Probable cause was frozen material around & on the rail lifting the wheels during shunting.