Vic - ready for work |
Dave, Dave, Nigel & Colin cleaning HL No.2 ..... |
..... before Ian & Dave take it to East Tanfield en route to NRM Shildon |
Dave helping to load No.2 at East Tabfield
(photos courtesy of Ian Cowan)
Dave bending bar for cranked point rod ends ..... |
..... checking the result ..... |
..... and Nigel tweaking the angles |
Colin enlarging bolt holes in concrete sleepers .... |
..... through which John passes bolts |
Dave drilling short rails .... |
..... which John & Colin drop on the sleepers ..... |
..... then Colin fastens the whole lot together |
Rob making up point roller mounts; Rob & Dave freeing point rodding cranks
Ian freeing point rod ends ..... |
..... and making pins for the rodding |