Roof

Barry & Dave guiding the last truss towards its place in MH shed

I'm holding a foot of the truss on its bearer
(photo courtesy of Dave Dixon)

Steve's setting the other foot
(photo courtesy of Dave Dixon)

Steve & I working on the alignment
(photo courtesy of Dave Dixon)

Fitting a temporary steel purlin as a stay
(photo courtesy of Dave Dixon)

Ian fastening the purlin to the truss

Steve & Dave sorting & treating purlins on the ground

A few purlins require shortening - Ian obliging
(photo courtesy of Dave Dixon)

Swapping a temporary steel purlin for wood

Dave treating the cut end of a wooden truss with preservative
(photo courtesy of Dave Dixon)

Sawing seen from above

Ian & I fitting purlins using the cherry pickers
(photo courtesy of Dave Dixon)

Ian fitting another purlin

Ian drilling a purlin to bolt it to a truss

Dave drilling another .....

..... with me at the other end
(photo courtesy of Dave Dixon)

About half of the purlins have been fitted onto the new trusses